---
title: "ARCH Web Explorer: Equipment (Rovers)"
canonical: "https://support.cordel.ai/space/CSD/1556578373/ARCH%20Web%20Explorer%3A%20Equipment%20(Rovers)"
format: markdown
---
## The Rover Search page

The Rovers Search page shows a list of all rovers and their current status. The information shown on this page includes: 

- The rover ID: the rover name
- Status: The rovers recording status. If the rover is not active, the status will be empty
- Config: The current GPS fix type (2D, 3D or Float)
- Location: Latitude and Longitudinal coordinates of the rover
- GPS: whether a GPS fix has been achieved
- CAM (video camera): whether the video camera is recording
- LID (LiDAR): whether the LiDAR is capturing data
- Last Activity: The time since the rover was last seen

![image-20240530-063000.png](media://a9c5ae6d-bc2a-4297-97d2-f77441d0f012)


## The Rover Viewer

Clicking on the rover name will open a map view centred on the last known/current location with the current status in a card at the bottom of the map

![image](media://9dc7a371-dce2-4e35-b0e5-03612f3a9db9)

## The Rover Status Legend > Macro (anchor)



When viewing a rover mission on the map, an information card is displayed that shows basic rover information and status.

![image](media://6b923f64-6be3-4017-8b57-e41c201fd976)

#### Rover statuses: 

- <span style="color: #36b37e">Green</span>
  - A good indicator that shows the associated component is operating properly.
- <span style="color: #ffc400">Yellow</span>
  - A warning indicator showing that there may be issues with the associated component, or that the component isn’t functioning properly and could cause issues.
- <span style="color: #ff5630">Red</span>
  - An error indicator showing there is something wrong with the associated component.
- <span style="color: #4c9aff">Blue</span>
  - An informational indicator that outlines that the associated component is ready.
- Black
  - An unavailable indicator that shows the component is not connected or unavailable.


#### Component statuses: 

Components shown in the rover information card include varying messages which can be viewed by hovering over the corresponding rover marker. 

- CAP - Capture Sensor
  - (<span style="color: #36b37e">Green</span>) Displays the duration of the capture process e.g. “*00:05:22*”.
  - (<span style="color: #4c9aff">Blue</span>) “*READY CaptureOnMovement*”
- GNSS Sensor
  - (<span style="color: #36b37e">Green</span>) Can be one of the following:
    - RTK FIX
    - RTK FLOAT
    - Sbas
    - Dgps
  - (<span style="color: #ffc400">Yellow</span>) Can be on of the following:
    - No base
  - (<span style="color: #ff5630">Red</span>) Can be one of the following:
    - No Decoder
    - No Stream
    - Not Decoding
    - No Data
    - No Signal
- CAM - Capture Sensor
  - (<span style="color: #ff5630">Red</span>) Can be one of the following:
    - No Camera
    - Unknown Mode
    - Not Listening
  - (<span style="color: #4c9aff">Blue</span>) Ready Waiting…
- STOR Storage
  - Tells the storage space available on the current device.
  - Colours based on size left:
    - (<span style="color: #36b37e">Green</span>) More than 10GB
    - (<span style="color: #ffc400">Yellow</span>) Between 5GB and 10
    - (<span style="color: #ff5630">Red</span>) Less then 5GB
- LiD - LiDAR Sensor
  - (<span style="color: #36b37e">Green</span>) Ready
  - (<span style="color: #ffc400">Yellow</span>) Can be one of the following:
    - Lidar Depowered
    - Powered Down
    - No Time Sync
    - Invalid Time Sync
    - No Time Exc
    - Dropped Packets
  - (<span style="color: #ff5630">Red</span>) Can be one of the following:
    - No data yet… (*Treat as an error if message persists for more than 30 seconds.*)
    - No Data
  - If other error messages appear, contact the service desk.