---
title: "Wave-OEM Safety"
canonical: "https://support.cordel.ai/space/CSD/2109538305/Wave-OEM%20Safety"
format: markdown
---
## Safety Warnings

In normal operation, when used as intended, this equipment poses no intrinsic risk to operators or other personnel.

This product is powered using a low-voltage DC source. When performing maintenance or inspections please follow these general safety precautions.

When working on electrical equipment

- Follow local site safety equipment.
- Ensure equipment is depowered and isolated from any power source.


![IEC-6003-E62-H__51236.jpg](media://8e3e37d0-d2a8-4d44-a483-a672cf7fbb60)


This system contains an internal Class 1 Laser measurement device. This system meets Class 1 eye-safety standards under normal operation. Never look into the transmitting laser through a magnifying device (Microscope, Eye Loupe, Magnifying Glass etc).

 Class 1 protection does not apply to damaged products. In all circumstances, if you suspect that the product malfunctions or is damaged, stop using it immediately to avoid potential hazards. 

 

> ⚠️ **There are no user-serviceable parts within the cordel capture system. This unit should not be opened other than by qualified personnel.**