---
title: "Cordel Wave-OEM Hardware User Guide"
canonical: "https://support.cordel.ai/space/CSD/2463761045/Cordel%20Wave-OEM%20Hardware%20User%20Guide"
format: markdown
---
## Introduction

Version: 1.1

This document is the operation and maintenance manual for the Cordel Wave-OEM Integration Kit, a LiDAR and video capture sensor.

To ensure your Cordel unit performs to its specifications and remains operable, it is important that you read through this user guide carefully.

This covers the normal operation of the hardware system and provides maintenance instructions. 

If you are in doubt regarding the contents of this user guide it is important that you contact the[ Cordel service desk](https://cordel.refined.site/portal/4) for clarification or further training. 

![Cordel logo](media://72159d4c-6b3d-4646-a714-0b8a4d5abe84)

### Applicability

The Cordel Wave-OEM is a bespoke system, installed and configured depending on client requirements.

Consequently, there may be some minor variations to the product finishes and connectors as shown in the document.

Please contact Cordel ([support@cordel.ai](mailto:support@cordel.ai)) for more information on individual model variations.

### Disclaimer

Cordel accepts no liability for damage or injury or any legal responsibility incurred directly or indirectly from the use of this product or data created. The user shall observe the operating guidelines of this unit and the guidelines of the equipment it is attached to at all times. 

If you are in doubt regarding the contents of this user guide it is important that you [contact](https://cordel.ai/contact) Cordel for clarification or further training.