---
title: "(3.0) Rovers"
canonical: "https://support.cordel.ai/space/CSD/3322874184/(3.0)%20Rovers"
format: markdown
---
The Rovers page provides users with the ability to view the location and status of their Cordel capture equipment. 

## Search

 Users can search for a specific Rover using the following filters: 

- Rover name: The name of the Rover.
- Status: The Rovers' recording status.
- Last Activity: The time the Rover was last seen.

## Rovers

Each Rover registered to your company will be displayed on this page. Each Rover has an information card and a colour coded map marker. 

This provides a quick visual indication of the location and overall state of each device, as well as the health of each individual sensor.

![image-20250410-024414.png](media://1b512401-31f1-45d6-bbb2-416597cb6fc7)


## Rover History

To view historical capture information, click the history icon

![image-20251208-030154.png](media://ba2ffa7e-8d0a-4f5f-ad1b-0acde0d0efc4)

(History) will be displayed next to the rover name and a date range filter will become available. Enter the date range you wish to view the history for. The Total Distance will update to reflect how many km/mi were captured between the entered date by the selected rover. 

> ℹ️ Note: Total distance is based on raw GPS data and may not always be fully reflective of actual capture distance.

![image-20251208-030103.png](media://6983c141-fa4d-417c-91e4-ba366ebef7f1)


## Overall Rover Status Legend > Macro (anchor)



When viewing a Rover marker on the map, the marker is coloured according to the overall status of the Rover:

🟩 Good. The device is fully operational.

🟦 Ready. The device is ready to capture.

🟨 <span style="color: #ffc400">Yellow: </span>Warning. There may be issues with the device, or the device isn’t fully functioning.

🟥 Error. There is something wrong with the device.

⬛ Unavailable. The device is not connected to power or is out of 4G service.


## Sensor Status Legend 

Sensors shown on the Rover Information card include the following statuses:

#### CAP - Capture Sensor

🟩 Capturing

🟦  Ready To Capture


#### GNSS Sensor

🟩 Good Fix - Fix type is one of the following:

- RTK FIX
- RTK FLOAT
- Sbas
- Dgps

🟨  Warning - No Fix

🟥 Error - Represents one of the following:

- No Decoder
- No Stream
- Not Decoding
- No Data
- No Signal


#### LiD - LiDAR Sensor

🟩  Capturing

🟦  Ready To Capture

🟨  Warning - Represents one of the following:

- Lidar Depowered
- Powered Down
- No Time Sync
- Invalid Time Sync
- No Time Exc
- Dropped Packets

🟥 Error - Represents one of the following:

- No data yet… (*Treat as an error if message persists for more than 30 seconds.*)
- No Data


#### STOR Storage 

Displays the available storage space on the selected device.

🟩  Ample available storage - more than 10GB

🟨  Enough available storage - between 5GB and 10

🟥   Not enough storage is available - less then 5GB


#### CAM - Camera Sensor

🟩  Capturing

🟦  Ready To Capture

🟥  Error - Represents one of the following:

- No Camera
- Unknown Mode
- Not Listening


If you need any assistance with your Cordel capture hardware, [please contact the service desk](https://support.cordel.ai/space/CSD/2466611416/How+To+Request+Technical+Support+For+Cordel+Connect).