English Spanish
English Spanish
Breadcrumbs

Wave-Rugged Camera assembly

Camera assembly

The camera component is shipped separately to the main Cordel Wave-Rugged unit, as shown in the picture above. Upon receiving the Cordel Wave-Rugged, you will need to bolt the Camera to the main unit using the provided bolts and tool, as depicted in the diagram below:


image-20240324-221449.png
image-20250529-231512.png





image-20240324-214432.png
4x M5 8mm
image-20240324-214947.png
3mm Hex Screwdriver

Wiring Diagram (Camera Gen 1 186.001)

image-20250825-000725.png
Wiring Diagram (Camera Gen 1 186.001)


 Wiring Diagram (Camera Gen 2 187.001)

image-20250804-000242.png
Wiring Diagram (Camera Gen 2 187.001)

 


image-20250804-000351.png
187.005.00 Y-splitter Cable


 

836d0461-b987-462c-b800-b51f25f528e6 (1).png
969.019 M12-M12 POE Cable

 

Torque setting, Camera Box

4.0Nm (3.0ft-lbs)