This sensor is designed as an always-on module. Anytime the system is powered it will capture LiDAR, INS, Camera data and store data on its internal 2TB drive (previously, this was 256GB). This system is designed as a FIFO buffer and will delete older data to save newly captured data. It is highly recommended to run a host machine to view the live status of the sensor as well as download data in real-time.
A host machine is a Windows operating system with the ability to connect to the provided ethernet connection of the Cordel Control Unit.
Operation of this equipment is covered in the Cordel Ground Station User Guide.
Setting a Static IP
For the system to connect to the local area network, the Host Machine must have a Static IPv4 address set.
Recommended Address:
IP address: 192.168.1.7
Subnet Mask: 255.255.255.0